Spiral wound gasket is formed of V-shaped Metallic strip and softnon-metallic filler. Support rings, inside and Outside the spiral,improve the gasket's handing, fitting and Versatility.
Depend on its excellent compression resilience, it is suitable forsealing spots where the alteration of temperature and pressure are frequent.
Types: |
|
Basic Type
Basic construction type, inner and outer diameters are reinforced with
several piles of metal without filler to give greater stability and better
compression characteristics. - Suitable for tongue and groove, male and
female or grooved to flat face flange assemblies.
|
 |
|
Inner Ring Type
Solid inner metal ring acts as a compression stopper. To prevent
accumulation of solids, reduce turbulent flow of process fluids
and minimize erosion, damages of gasket between flange bore and
the inside diameter, the annular space is filled up by solid inner
metal ring. - Suitable for male and female pipe flanges.
|
 |
|
Outer Ring Type
Solid outer ring accurately locates the gasket on the flange face to give
the additional radial strength to prevent the gasket blowout and acts as a
compression limiter. In case of installing the outer ring, it is very easy to
install the gasket to flange face because the end of outer ring will touch at
bolts - Suitable for use with flat face and raised face flanges. For class 900
and above an internal ring is recommended.
|
 |
|
Inner & Outer Rings Type
A inner ring and outer ring type gasket will give an additional compression
limiting stopper for gasket inner and outer side. It will prevent the
corrosions on flange face at annular space. - Suitable for use with flat
face and raised face flanges and specified for high pressure / temperature
service - Class 900 and above or where corrosive or toxic media are present.
|
 |
|
Typical Applications:
Prime Features:
Specifications:
Spiral Wound Gaskets Package Types: Between 1/2'' ~ 24'' gaskets are packaged by plastic clips each 10 pcs. Up to 24'' gaskets packaged by soft cotton tape each. To ensure that clients receive the highest quality of spiral wound gaskets. |
  |
International:www.kinglandsolutions.com
Domestic:www.kinglandsolutions.com.cn
